yegorgk
Зарегистрирован: 01 янв 1970, 03:00 Сообщения: 223
|
Вобщем есть схема. комп-----2851-----2851-----комп пытаюсь настроить между ними EoMPLS .
конфиг первой
interface Loopback0 description --Main IP --- ip address 94.xx.xx.x 255.255.255.255 ip flow egress
interface Tunnel143 description ------ ip address 10.20.20.121 255.255.255.252 mpls ip tunnel source 94.xx.xx.x адрес лупбека tunnel destination 94.xx.xx.x адрес лупбека другой циски tunnel mode ipip
interface GigabitEthernet0/0.396 description -- encapsulation dot1Q 396 ip flow egress ip virtual-reassembly xconnect 10.20.20.122 123 encapsulation mpls
конфиг второй
interface Loopback0 description --Main IP --- ip address 94.xx.xx.x 255.255.255.255
interface Tunnel143 description --- Tunnel MCHS Krasnodar--- ip address 10.20.20.122 255.255.255.252 mpls ip tunnel source 94.xx.xx.x адрес лупбека tunnel destination 94.xx.xx.x адрес лупбека другой циски tunnel mode ipip
interface GigabitEthernet0/0.396 description --- --- encapsulation dot1Q 396 xconnect 10.20.20.121 123 encapsulation mpls
Далее тунели установились
второй
sh mpls ldp neighbor Peer LDP Ident: 10.20.20.121:0; Local LDP Ident 10.20.20.122:0 TCP connection: 10.20.20.121.646 - 10.20.20.122.41979 State: Oper; Msgs sent/rcvd: 866/859; Downstream Up time: 12:18:16 LDP discovery sources: Tunnel143, Src IP addr: 10.20.20.121 Targeted Hello 10.20.20.122 -> 10.20.20.121, active, passive Addresses bound to peer LDP Ident:
sh mpls l2transport vc 123 detail Local interface: Gi0/0.396 up, line protocol up, Eth VLAN 396 up Destination address: 10.20.20.121, VC ID: 123, VC status: up Output interface: Tu143, imposed label stack {18} Preferred path: not configured Default path: active Next hop: point2point Create time: 12:25:33, last status change time: 12:19:34 Signaling protocol: LDP, peer 10.20.20.121:0 up MPLS VC labels: local 19, remote 18 Group ID: local 0, remote 0 MTU: local 1500, remote 1500 Remote interface description: -- Sequencing: receive disabled, send disabled VC statistics: packet totals: receive 0, send 33359 byte totals: receive 0, send 3147495 смущает что receive 0 packet drops: receive 0, seq error 0, send 0
Первый
sh mpls ldp neighbor Peer LDP Ident: 10.20.20.122:0; Local LDP Ident 10.20.20.121:0 TCP connection: 10.20.20.122.41979 - 10.20.20.121.646 State: Oper; Msgs sent/rcvd: 863/870; Downstream Up time: 12:21:18 LDP discovery sources: Tunnel143, Src IP addr: 10.20.20.122 Targeted Hello 10.20.20.121 -> 10.20.20.122, active, passive Addresses bound to peer LDP Ident:
sh mpls l2transport vc 123 detail Local interface: Gi0/0.396 up, line protocol up, Eth VLAN 396 up Destination address: 10.20.20.122, VC ID: 123, VC status: up Output interface: Tu143, imposed label stack {19} Preferred path: not configured Default path: active Next hop: point2point Create time: 12:22:40, last status change time: 12:21:54 Signaling protocol: LDP, peer 10.20.20.122:0 up MPLS VC labels: local 18, remote 19 Group ID: local 0, remote 0 MTU: local 1500, remote 1500 Remote interface Sequencing: receive disabled, send disabled VC statistics: packet totals: receive 0, send 14709 byte totals: receive 0, send 1605332 packet drops: receive 0, seq error 0, send 0
Вроде все установилось но receive 0 смущает и еще ничего не работает. может кто сталкивался ?
|
yegorgk
Зарегистрирован: 01 янв 1970, 03:00 Сообщения: 223
|
Всем кому интересно, вопрос решен можно переносить в решенные задачи, проблемма была в следующем ipip туннеле может работать больше одного протокола ? (ip+mpls) , поэтому нужно использовать на тунелях gre инкапсуляцию.
|